Guide Download

The Samsung Galaxy S6 Edge (SM-G925T)*from T-Mobile USA is*using a
custom firmware preventing the phone from being unlocked by code as
there is no way to enter it (these phone are simply not asking for “SIM Network Unlock PIN”). Before this post, the only way to Unlock the phone was by using the official T-Mobile* “Mobile Device Unlock App”*which
is an Android app called “Device Unlock” that allows you to request and
apply a mobile device unlock directly from the device. And absolutely no code that you’ll be able to buy online will work using this app.

Original “Locked Screen” of a Samsung Galaxy S6 Edge from T-Mobile USA


So what do you do if you get an Unlock Code but you cannot use it?


Now there is a solution consisting of an upgrade to the firmware of the
phone with Telus Canada*Firmware instead of T-Mobile USA, and this will
allow the phone to ask for the Unlock Code. Below you will find a
tutorial about how to do this. Once you flash (update) your Phone with
this New Firmware, please make sure that your Samsung SM-G925T is now
asking for “SIM Network Unlock PIN”. And if the answer is yes you can then click this link to*order the Unlock Code of your Samsung Galaxy 6 Edge*from T-Mobile USA.

Service Name: Samsung T-Mobile USA [NEW GEN 2015] – NCK + SPCK (14 Hours Mon-Fri) – [Tool ID:*775]

Please note: This
method has been proven to work because it uses Samsung’s Official
programs and the Official stock Telus Canada*provided Images. As with
any Official carrier or manufacturer *firmware flashing this must be
done at Your Own Discretion. The instructions are outlined CLEARLY and
you must follow the instructions exactly. If any issues arise we cannot
take responsibility for any issues. If you do not want to proceed,
unfortunately we are unable to provide refunds as stated on our website
before ordering. Please contact us for more information. You MUST
perform these instructions and make sure the phone prompts with a NON
accepted sim before you order or No Refunds!



Disclaimer:*UnlockBase
is not responsible if users break / brick or damage their phone while
trying to use this method. You must not use this firmware for any other
Android Cell Phone other than the Samsung Galaxy S6 Edge (SM-G925T) from
T-Mobile USA. Do so at your own risk. If you’re not sure what you are
doing, please seek assistance at a local cell phone service center in
your area.

Step 1 (Preparation):*

1. Galaxy S6 Edge: *Download the Special Telus Canada*Firmware for Samsung SM-G925T.


2. Download ODIN v3.10.0 Service Software using this link (NEW:*Odin v3.10.5 or Odin v3.10.6)


3. Make sure your phone battery is charged more than 60%.


4. Enable USB Debugging, by open Settings > Developers Option > USB Debugging
   If Developers Option is hidden, go to Settings > About Phone > Built Number (tap on it for 5-8 times)


5. Make sure you install the Samsung Galaxy S6 Edge USB drivers on your PC, if you haven’t already.

Optional (Galaxy S6 Edge):*Download the*Original T-Mobile*Firmware for Samsung SM-G925T.

Step 2 (Update Firmware):*

1. Run Odin3 v3.10.0*as administrator (Right-Click: Run as Administrator).


2. Switch OFF your Samsung Galaxy S6 Edge.


3. Boot in download*mode, by pressing the*Volume Down + Home + Power Key*simultaneously.
   


4. When*you see the screen below:Samsung Galaxy S6 Edge in Download Mode
   
   
   
   Tap Volume Up button to enter Download Mode.


5. Connect the Samsung Galaxy S6 Edge to your PC with the USB cable.
   
   Odin will automatically detect your phone and show the “Added!” message.


6. In the Odin, click on AP or PDA*and then choose :- For Galaxy S6 Edge (SM-G925T) : G925W8VLU1AOCG_G925W8OYA1AOCG_G925W8VLU1AOCG_HOME. tar.md5*file.


7. Ensure Auto Reboot and F. Reset Time options are selected*selected in Odin
   
   while the Re-Partition option is unchecked (this is very important).


8. Click*Start*in Odin and wait for the software to update your phone.


9. Once the root installation is done, your phone will reboot
   
   and soon a PASS message with a green background appears in the left-most box at the very top of Odin.


10. You can close Odin after device turns on.


11. Your*Samsung Galaxy S6 Edge is now fully updated with MetroPCS Firmware!

AFTER
FLASHING A SAMSUNG GALAXY S6 EDGE FROM*T-MOBILE WITH THIS FIRMWARE THE
PHONE WILL FINALLY ASK FOR A NETWORK CODE WHEN YOU PUT A NON APPROVED
CARRIER’S SIM CARD ON THE PHONE.




AFTER YOU HAVE UNLOCKED YOUR PHONE YOU CAN STILL FLASH A T-MOBILE
FIRMWARE BACK TO THE DEVICE SO THAT IT GOES BACK TO ORIGINAL STOCK AND
SO DOES NOT LOSE WARRANTY. BUT THE PHONE WILL RELOCK AS SOON AS YOU FLASH IT BACK WITH T-MOBILE FIRMWARE.

• Download the*Original T-Mobile Stock Firmware for Samsung SM-G925T*(Galaxy S6 Edge).

Troubleshooting : I am stuck on the SAMSUNG BOOT LOGO! What do I do?


First, do not worry, your phone is not broken. Simply follow the instructions below:


a. Wait at least 5 minutes to make sure you are stuck on the logo screen

b. Pull the battery out and wait 30 seconds, then put the battery back in

c. Turn the phone on by: HOLDING VOLUME UP + HOME + POWER you will soon see the RECOVERY page

Tip: when the phone turns on let go of the power button ONLY, when you see the recovery let go of everything


d. Scroll down to WIPE factory user data reset and select it

when prompted scroll to YES and select it to do a factory wiping


e. Scroll down to WIPE CACHE PARTITION and select it,

when prompted scroll to YES and select it to do a wipe on cache

Tip: Use the volume rockers to navigate and the power button to Select your option


f. *Reboot the phone, you should load properly now


The post Unlock Samsung Galaxy S6 Edge (SM-G925T) from T-Mobile USA appeared first on UnlockBase Blog.



More...